Hati
Хати · derived from F95
Sergey Shirogorov · 95 mm blade · Frame lock. 6 models in the catalog.
On this page
Also listed as: Hati R, HatiR, Хати Р
Built on the F95: the F95 blade on a handle with a titanium lock side and a carbon fiber or G10 show side.
About this line
The Hati is a lighter version of the F95 by Sergey Shirogorov: the F95 blade and frame lock on a handle with a titanium lock side and a carbon fiber or G10 show side, which collectors read as the source of the name, half titanium. The asymmetric build cuts roughly a quarter of the F95's weight; both sides are milled internally, the show scale is screwed on and user-serviceable, and every model has a backspacer. The earliest factory mention is a February 2014 notice closing orders for the Hati and F3. Three generations exist: Gen 1 on bronze phosphor washers, Gen 2 sold from 2017 as the HatiR with the move to MRBS, revised contouring and Alutex special editions, and Gen 3, announced by the factory on 14 May 2022, with a TechnoCarbo presentation scale and lockbar-side inlay and a slimmer profile. A 100-piece Gen 3 Slim in M398 is the lightest version. Custom Division Hatis run on SRRBS or DRRBS, including the 3D Seashell, a 50-piece 3D Bronze and a 50-piece CD Magnetic. The HatiOn, despite the name, is a NeOn-platform knife and not a Hati variant. The line is current.
Facts
Baseline: Hati Gen.3- Blade length
- 95mm (3.74in)
- Blade thickness
- 3.5mm (0.14in)
- Handle thickness
- —
- Handle length
- 128mm (5.19in)
- Overall length
- 222mm (8.74in)
- Weight
- 110gr (3.88oz)
- Pivot
- MRBS
- Steel
- M390
- Handle options
- TechnoCarbo presentation scale and lockbar-side inlay
- Locking mechanism
- Frame lock
- Grind
- Full flat grind
- Clip
- Titanium, tip-up, non-reversible
- Hardware
- Titanium
- Designer
- Sergey Shirogorov
- First release
- 2022-05-14
- Generations
- Gen.3
- Status
- Current
- On factory site
- Yes, currently listed
- In the box
- Hati lanyard bead (some configurations)
Dimensions are the line baseline; steel, handle and finish vary by configuration — see the models table below.
Models in this line
Columns
Hati Gen.3 | Serial | 2022 | M390 | — | — |
Hati 3D Seashell3D Seashell | Custom Division | unpublished | S90V | — | — |
Hati CD | Custom Division | unpublished | Vanadis 10 | — | — |
Hati-3 CD | Custom Division | unpublished | S90V | — | — |
Hati 3D Bronze3D Bronze | Custom Division | unpublished | S90V | 50 pcs | — |
Hati CD MagneticMagnetic | Custom Division | unpublished | S90V | 50 pcs | — |
Customs in this line
23 customs on the Hati platformBy year, with the workshop's photographs and the steel, finish and handle of each, and what recurs across them.Custom Division in this line
5 Custom Division editions on the Hati platformBy year, with the factory's photographs and the steel, blade length, handle and bearing system of each.Repair kits for this line
Questions about the Hati
Which side does the pivot screw go in from on the Hati 3D Bronze and Hati CD Magnetic?
The pivot screw on the Hati 3D Bronze and the Hati CD Magnetic goes in from the titanium lock side.
How is the pivot on the Hati CD Magnetic built?
The Hati CD Magnetic uses the PLDS pivot: one solid steel piece on the show side runs through the full thickness of the carbon fiber scale. That piece is both the washer the bearings ride on and the pivot collar, so the pivot screw seats on metal instead of carbon fiber.
How do the handle patterns on the Hati 3D Seashell, Hati 3D Bronze and Hati CD Magnetic differ?
The Hati 3D Seashell has a seashell texture milled as a vertical wave, the Hati 3D Bronze has fine silk milling, and the Hati CD Magnetic has the horizontal Hati wave. Silk milling is a fine line texture that is easier to feel than to see.
Where are the logos on the Hati 3D Bronze and Hati CD Magnetic?
The Hati 3D Bronze carries the Custom Division logo on the show side of the blade and the Shirogorov logo engraved on the handle. The Hati CD Magnetic carries the Shirogorov logo on a zirconium plate at the rear of the show side handle.
What versions of the Hati 3D Seashell were made?
The Hati 3D Seashell has either a Silver Twill show scale, a silver woven composite, or a black carbon fiber show scale. On either version the titanium lock side is polished or black PVD coated, a thin, hard coating.
Which parts of the Hati 3D Bronze are bronze?
The pivot collar, the pocket clip and the backspacer of the Hati 3D Bronze are bronze. The bronze clip and backspacer add the most weight to the knife and balance the blade from the back.
Secondary market for the Hati
19 observations in the last 12 months, across 2 sources (RU, US). Trend: flat. Latest observation: .
Sign in for current low, high, median, per-transaction detail, and open listings.