Pike
Пайк
Dmitry Sinkevich. 1 model in the catalog.
On this page
Also listed as: Pike (white), Pike (blue), Pike (red)
About this line
The Pike is a joint project with Dmitry Sinkevich, released on 8 August 2026 as a limited series in three colors. Sinkevich's custom Pike won Best Tactical Folding Knife at Blade Show 2024; the factory showed a prototype at Blade Show 2025 and announced the project there. The blade is a clip point, the profile the factory calls the pike, with a pronounced choil and a wide swedge that stops short of the tip; it is hardened to 63 to 64 HRC and finished with stonewashed bevels and hand-applied longitudinal satin on the flats. It is a flipper with a mid-size jimped tab. The handle is two titanium liners with large carbon fiber inserts that run the full length of the handle and sit deep in the liners; the inserts are held by the pivot screw, a small titanium insert and the clip rather than glued. The three versions differ in the pigment of the inserts: white, blue and red. A long dark grey anodized titanium backspacer carries an elongated lanyard slot, and the liner lock has a steel insert. The run is 300, 100 of each color, numbered 1 to 300, released by lottery in three parts.
Facts
- Blade length
- 95 mm
- Blade thickness
- 3.4 mm
- Handle thickness
- 11.7 mm
- Handle length
- 123 mm
- Overall length
- 220 mm
- Weight
- 94 g
- Pivot
- MRBS
- Steel
- MagnaCut
- Handle options
- Titanium, carbon fiber (CF)
- Locking mechanism
- Liner lock
- Clip
- Shape echoes the handle silhouette; holds the rear carbon insert on the lock side
- Backspacer
- Titanium, dark grey anodized, milled, with an elongated lanyard slot
- Hardware
- Pivot screw with figured milling and satin chamfers; MRBS multi-row bearings
- Designer
- Dmitry Sinkevich
- Collaboration partner
- Dmitry Sinkevich
- Total production
- 300 pieces across 3 editions
- First release
- 2026-08-08
- Status
- Project
- On factory site
- Not currently listed
Models in this line
Columns
Pike | Collaboration | 2026 | MagnaCut | 300 pcs | — |
Customs in this line
3 customs on the Pike platformBy year, with the workshop's photographs and the steel, finish and handle of each, and what recurs across them.Secondary market for the Pike
1 observation in the last 12 months across 1 source (RU). Thin market: figures behind sign-in.
- Previous in collaboration designs
- Bio
- Next in collaboration designs
- Russian Flippin' Tanto